Item type |
デフォルトアイテムタイプ_(フル)(1) |
公開日 |
2023-03-18 |
タイトル |
|
|
タイトル |
Visually quantifiable test piece for five-axis machine tools thermal effects |
|
言語 |
en |
作成者 |
Huang, Nuodi
Zhang, Yang
Zhu, Limin
Ibaraki, Soichi
|
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
権利情報 |
|
|
権利情報 |
© 2021 The American Society of Mechanical Engineers.This manuscript is distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). |
権利情報 |
|
|
権利情報 |
This is not the published version. Please cite only the published version. この論文は出版社版ではありません。引用の際には出版社版をご確認、ご利用ください。 |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
Thermal deviation |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
five-axis machine tool |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
machining test |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
test piece design |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
deviation visualization |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
design for manufacturing |
主題 |
|
|
主題Scheme |
Other |
|
主題 |
metrology |
内容記述 |
|
|
内容記述 |
Thermal deviation induced by ambient temperature changes and heat generated during machine operations influences the accuracy of machine tools. A thermal test is essential to evaluate the influence of thermal deviation. ISO 230-3 provides displacement sensor-based thermal tests for machine tools. This paper proposes a machining test that enables a user to visually, by the naked eye, observe the integrated thermal influence on the tool trajectory's displacement in the direction normal to the test piece surface from the length of the machined slots. The proposed test consists of the machining of the five surfaces to observe the thermal influence of the tool position with respect to the test piece in X, Y, and Z directions, as well as the position of two rotary axes with respect to the tool position. The advantages of the proposed test include that it requires no measuring instrument to quantitatively evaluate the thermal error in all directions. And since the thermal influence is evaluated by observing the position where the cutting tool leaves the test piece surface, where the cutting force is zero, the influence of the cutting force on the test results can be ignored. Thermal influences of a five-axis machine tool during the warm-up cycle are investigated by experiment to validate the feasibility of the proposed method. Results show that 150 min is needed for sufficient warm-up for the selected machine tool if permissible tolerance for thermal deviation is 2.5 µm for all the errors. |
|
言語 |
en |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China (No. 52075337) and the Shanghai Pujiang Program (No. 2020PJD024). State Key Laboratory of Mechanical System and Vibration (No. MSVZD202113). |
出版者 |
|
|
出版者 |
The American Society of Mechanical Engineers |
言語 |
|
|
言語 |
eng |
資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
journal article |
出版タイプ |
|
|
出版タイプ |
AO |
|
出版タイプResource |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
関連情報 |
|
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
https://doi.org/10.1115/1.4052388 |
関連情報 |
|
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
10.1115/1.4052388 |
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
1528-8935 |
開始ページ |
|
|
開始ページ |
054501 |
書誌情報 |
en : The Journal of Manufacturing Science and Engineering
巻 144,
号 5,
p. 054501,
発行日 2021-10-19
|
旧ID |
52319 |
備考 |
The full-text file will be made open to the public on 19 Oct 2022 in accordance with publisher's 'Terms and Conditions for Self-Archiving' |