WEKO3
アイテム
Precipitation and Cr depletion profiles of Inconel 182 during heat treatments and laser surface melting
https://hiroshima.repo.nii.ac.jp/records/2007374
https://hiroshima.repo.nii.ac.jp/records/2007374d2aa86e8-7bde-4a0e-af93-e1a69aa52a39
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
Item type | デフォルトアイテムタイプ_(フル)(1) | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
公開日 | 2023-03-18 | |||||||||||
タイトル | ||||||||||||
タイトル | Precipitation and Cr depletion profiles of Inconel 182 during heat treatments and laser surface melting | |||||||||||
言語 | en | |||||||||||
作成者 |
Baoa, Gang
× Baoa, Gang
× Yamamoto, Motomichi
× Shinozaki, Kenji
|
|||||||||||
アクセス権 | ||||||||||||
アクセス権 | open access | |||||||||||
アクセス権URI | http://purl.org/coar/access_right/c_abf2 | |||||||||||
権利情報 | ||||||||||||
権利情報 | Copyright (c) 2008 Published by Elsevier B.V. | |||||||||||
主題 | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | Cr depletion | |||||||||||
主題 | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | IGC/IGSCC susceptibility | |||||||||||
主題 | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | Inconel 182 | |||||||||||
主題 | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | LSM | |||||||||||
主題 | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | precipitation | |||||||||||
主題 | ||||||||||||
主題Scheme | NDC | |||||||||||
主題 | 560 | |||||||||||
内容記述 | ||||||||||||
内容記述 | Thermodynamic and kinetic modeling was conducted to simulate Cr depletion profiles near grain boundaries in Inconel 182 during heat treatments and laser surface melting (LSM) using Thermo-Calc and DICTRA code. The effect of Nb addition was also considered in the modeling. Based on the good agreement with Cr concentration distributions during the heat treatments measured experimentally, Cr depletion profiles adjacent to grain boundaries during the heat treatments and the LSM process were modeled. The Cr depletion profiles were evaluated using the Cr depletion area below the critical Cr concentration for IGC/IGSCC (Intergranular Cracking/Intergranular Stress Corrosion Cracking) susceptibility (12 mass%). Compared with the result of the Streicher test, the calculated Cr depletion areas showed good agreement with IGC/IGSCC susceptibilities. The sample after stress relief (SR) treatment had the largest Cr depletion area and showed the poorest IGC/IGSCC resistance. Cr depletion showed some recovery during subsequent low temperature sensitization (LTS). The sample after the LSM process had the smallest Cr depletion area and showed the best IGC/IGSCC resistance. | |||||||||||
言語 | en | |||||||||||
出版者 | ||||||||||||
出版者 | Elsevier Science S.A. | |||||||||||
言語 | ||||||||||||
言語 | eng | |||||||||||
資源タイプ | ||||||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||||||
資源タイプ | journal article | |||||||||||
出版タイプ | ||||||||||||
出版タイプ | AO | |||||||||||
出版タイプResource | http://purl.org/coar/version/c_b1a7d7d4d402bcce | |||||||||||
関連情報 | ||||||||||||
識別子タイプ | DOI | |||||||||||
関連識別子 | 10.1016/j.jmatprotec.2008.02.021 | |||||||||||
関連情報 | ||||||||||||
識別子タイプ | DOI | |||||||||||
関連識別子 | http://dx.doi.org/10.1016/j.jmatprotec.2008.02.021 | |||||||||||
収録物識別子 | ||||||||||||
収録物識別子タイプ | ISSN | |||||||||||
収録物識別子 | 0924-0136 | |||||||||||
収録物識別子 | ||||||||||||
収録物識別子タイプ | NCID | |||||||||||
収録物識別子 | AA10748601 | |||||||||||
開始ページ | ||||||||||||
開始ページ | 416 | |||||||||||
書誌情報 |
Journal of Materials Processing Technology Journal of Materials Processing Technology 巻 209, 号 1, p. 416-425, 発行日 2009-01-01 |
|||||||||||
旧ID | 25940 |