ログイン
言語:

WEKO3

  • トップ
  • ランキング
To
lat lon distance
To

Field does not validate



インデックスリンク

インデックスツリー

メールアドレスを入力してください。

WEKO

One fine body…

WEKO

One fine body…

アイテム

  1. 研究報告書

海水環境下におけるアルミニウム合金のエロージョン‐コロージョン

https://hiroshima.repo.nii.ac.jp/records/2000405
https://hiroshima.repo.nii.ac.jp/records/2000405
47ce69df-4d36-42e2-a7d8-d267e6a68b84
名前 / ファイル ライセンス アクション
SaltScienceKenkyuHokoku_200619.pdf SaltScienceKenkyuHokoku_200619.pdf (375.9 KB)
Item type デフォルトアイテムタイプ_(フル)(1)
公開日 2023-03-18
タイトル
タイトル 海水環境下におけるアルミニウム合金のエロージョン‐コロージョン
言語 ja
タイトル
タイトル Erosion-Corrosion of Aluminum Alloys in Sea Water Environment
言語 en
作成者 矢吹, 彰広

× 矢吹, 彰広

ja 矢吹, 彰広

en Yabuki, Akihiro

Search repository
アクセス権
アクセス権 open access
アクセス権URI http://purl.org/coar/access_right/c_abf2
権利情報
権利情報 Copyright (c) by Author
主題
主題Scheme NDC
主題 430
内容記述
内容記述 Aluminum alloys are used as heat exchangers in air separation plants that are operated at cryogenic temperature, including ethylene plants, liquefaction gas plants and gas vaporization plants, because of their excellent mechanical properties at lower temperature, high heat transfer properties and economical performance. Damage by corrosion is not apparent in an air separation plant, since the fluid processed in the plant is relatively clean. Heat sources such as air, hot water and seawater are used in a gas vaporization plant depending on the environment and the scale of the plant. Seawater is used as a heat source in a large-scale gas vaporization plant in close proximity to the coast, and corrosion that occurs on the surface of the seawater side of the heat exchanger in the plant must be prevented. A new type of jet-in-slit testing apparatus for a specimen chilled by a peltier element was developed, and corrosion tests and polarization measurements were carried out at various temperatures in artificial seawater under flowing conditions. The effect of chilling the specimen on corrosion was investigated. The surface appearance and cross-sectional profiles of a specimen after the test were observed and corrosion tests at various flow velocities were conducted to define the type of corrosion that occurs. Corrosion tests on a cathodically polarized specimen were conducted under flowing seawater at various temperatures to evaluate the effect of cathodic prevention. The following results were obtained. The effect of chilling by the peltier element was apparently the same as the corrosion behavior in a solution 5°C lower than the temperature of the solution in this apparatus. No unusual corrosion by chilling the specimen was found. As the temperature of the solution became lower, corrosion damage to the specimen decreased. This was caused by the formation of an excellent passive film against corrosion at lower temperatures. Corrosion damage to an aluminum alloy increased with increasing flow velocity of seawater at 30°C, and a breakaway velocity was recognized, therefore, damage occurring at 30°C is "Erosion-corrosion". The extent of corrosion damage at lower temperatures was very low, and it was not affected by flow. A corrosion test of a specimen polarized at -1000 mV was carried out under flowing seawater, and the corrosion was accelerated at temperatures below 25°C. This is because a passive film could not be formed on a specimen by cathodic polarization.
言語 en
内容記述
内容記述タイプ Other
内容記述 ソルト・サイエンス研究財団一般公募助成研究 研究期間: 2006年度 助成番号: 0619
出版者
出版者 ソルト・サイエンス研究財団
言語
言語 jpn
資源タイプ
資源タイプ識別子 http://purl.org/coar/resource_type/c_18ws
資源タイプ research report
出版タイプ
出版タイプ VoR
出版タイプResource http://purl.org/coar/version/c_970fb48d4fbd8a85
収録物識別子
収録物識別子タイプ NCID
収録物識別子 AA11508498
開始ページ
開始ページ 207
書誌情報 財団法人ソルト・サイエンス研究財団助成研究報告集
財団法人ソルト・サイエンス研究財団助成研究報告集

巻 2006年度, p. 207-214, 発行日 2008-03
旧ID 46468
戻る
0
views
See details
Views

Versions

Ver.1 2025-02-13 05:12:03.610268
Show All versions

Share

Mendeley Twitter Facebook Print Addthis

Cite as

エクスポート

OAI-PMH
  • OAI-PMH JPCOAR 2.0
  • OAI-PMH JPCOAR 1.0
  • OAI-PMH DublinCore
  • OAI-PMH DDI
Other Formats
  • JSON
  • BIBTEX

Confirm


Powered by WEKO3


Powered by WEKO3